Kernel boot

Hi,

I have the following in my lilo.conf file (below), but cannot understand why when I run

# uname -a

I get the 2.4.21-15.0.4.ELsmp showing up. Is it booting into the correct newest kernel? How can I check please? How an I correct please?

[root@* root]# uname -a
Linux *.*.net 2.4.21-15.0.4.ELsmp #1 SMP Wed Aug 4 00:52:17 EDT 2004 i686 i686 i386 GNU/Linux
[root@* root]#


[root@valiant root]# cat /etc/lilo.conf
prompt
timeout=50
default=linux
boot=/dev/sda
map=/boot/map
install=/boot/boot.b
message=/boot/message
linear

image=/boot/vmlinuz-2.4.21-27.0.2.ELsmp
label=2.4.21-27.0.2.1
initrd=/boot/initrd-2.4.21-27.0.2.ELsmp.img
read-only
root=/dev/sda6
image=/boot/vmlinuz-2.4.21-27.0.2.EL
label=2.4.21-27.0.2.E
initrd=/boot/initrd-2.4.21-27.0.2.EL.img
read-only
root=/dev/sda6
image=/boot/vmlinuz-2.4.21-27.0.1.EL
label=2.4.21-27.0.1.1
initrd=/boot/initrd-2.4.21-27.0.1.EL.img
read-only
root=/dev/sda6
image=/boot/vmlinuz-2.4.21-27.0.1.ELsmp
label=2.4.21-27.0.1.E
initrd=/boot/initrd-2.4.21-27.0.1.ELsmp.img
read-only
root=/dev/sda6
image=/boot/vmlinuz-2.4.21-27.ELsmp
label=2.4.21-27.ELsmp
initrd=/boot/initrd-2.4.21-27.ELsmp.img
read-only
root=/dev/sda6
image=/boot/vmlinuz-2.4.21-27.EL
label=2.4.21-27.EL
initrd=/boot/initrd-2.4.21-27.EL.img
read-only
root=/dev/sda6
image=/boot/vmlinuz-2.4.21-20.0.1.EL
label=2.4.21-20.0.1.1
initrd=/boot/initrd-2.4.21-20.0.1.EL.img
read-only
root=/dev/sda6
image=/boot/vmlinuz-2.4.21-20.0.1.ELsmp
label=2.4.21-20.0.1.E
initrd=/boot/initrd-2.4.21-20.0.1.ELsmp.img
read-only
root=/dev/sda6
image=/boot/vmlinuz-2.4.21-20.EL.c0smp
label=2.4.21-20.EL.c1
initrd=/boot/initrd-2.4.21-20.EL.c0smp.img
read-only
root=/dev/sda6
image=/boot/vmlinuz-2.4.21-20.EL.c0
label=2.4.21-20.EL.c0
initrd=/boot/initrd-2.4.21-20.EL.c0.img
read-only
root=/dev/sda6
image=/boot/vmlinuz-2.4.21-15.0.4.ELsmp
label=linux
initrd=/boot/initrd-2.4.21-15.0.4.ELsmp.img
read-only
root=/dev/sda6

 

 

 

 

Top